Overview

The Omni Dripper 2 replaces xBloom’s original reusable dripper and addresses several issues users reported with the first version. The redesigned magnetic attachment sits flush and no longer tilts during brewing, the wider opening makes dosing and filter placement easier, and the anti-static coating on the inner walls reduces coffee grounds sticking to the surface after grinding. The removable Hyperflow base (a flat-bottomed filter plate with perforations) can be detached for cleaning and promotes even water distribution through the coffee bed.

What changed from the original Omni Dripper

The most common complaint about the v1 dripper was that it sat at a slight angle on the xBloom Studio’s magnetic dock, sometimes causing uneven extraction. The Omni Dripper 2 fixes this with a redesigned magnet housing that locks the dripper in place. It also adds small ridges on the inner sidewall that hold the filter paper in position, even without pre-wetting. If you are still using the original dripper and noticing a tilt or loose fit, this is the direct upgrade.

Standalone use

While the Omni Dripper 2 is built for the xBloom Studio, it also works as a regular pour-over dripper placed on top of a cup or server. It accepts standard 155 mm wave-style filters (the same size used by drippers like the Kalita Wave 155), so you are not locked into xBloom’s own filter papers. When used with the xBloom Studio, make sure your cup is 105 mm or shorter to fit under the dripper.

Specifications

What’s in the box

• xBloom Omni Dripper 2 (with Hyperflow base installed)