Overview

The Omni Tea Brewer turns the xBloom Studio into a tea machine. It docks in the same magnetic position as the Omni Dripper 2 and uses the Studio’s brewer module for water temperature control and timed pours. The clever part is the drain mechanism: it works on the Pythagorean cup principle, where the brewer holds water during steeping and then automatically releases the full volume into your cup once the liquid level reaches a specific point. This means you get a controlled, repeatable steep without having to lift and remove the brewer yourself.

How brewing works

You add 3-5 g of loose-leaf tea to the brewer, place it on the Studio dock, and start a recipe (either through the xBloom app or via the Studio’s physical controls). The Studio dispenses water at the temperature you set, the tea steeps for the programmed duration, and when the final pour tops up the liquid to the siphon trigger point, the brewed tea drains through the stainless steel filter into your cup below. Each steep produces about 120 ml. For teas that benefit from multiple infusions (oolongs, pu-erh, some greens), you can run successive steeps with different temperatures and times using the app’s recipe system.

What it replaces and what it doesn’t

The Omni Tea Brewer is a separate accessory from the Omni Dripper 2 that ships with the Studio. It does not replace the coffee dripper; you swap between them depending on what you are brewing. It is not a standalone device and requires the xBloom Studio to function, since it depends on the Studio’s water heating, pouring, and scale modules. The brewer consists of two detachable parts (the Tritan dripper body and the siphon control base) that come apart for cleaning.

Specifications

What’s in the box

• Omni Tea Brewer (dripper body + siphon control base)